Samsung T7 SSD 1Tb
Samsung T7 SSD 1Tb
I notice Samsung SSD T7 is not supported. Will it be in the near future?
- hdsentinel
- Site Admin
- Posts: 3128
- Joined: 2008.07.27. 17:00
- Location: Hungary
- Contact:
Re: Samsung T7 SSD 1Tb
Thanks for your message and sorry for the possible troubles.
Generally it should be supported without problems in recent versions of Hard Disk Sentinel, the health, temperature and complete status should be detected and displayed of course.
If you use older version, I suggest to update to latest 5.70 (or even try the latest possible 5.70.9 beta version just to be sure:
https://www.hdsentinel.com/beta5/hdsent ... 9-amnr.zip
as it has generic updates for many SSDs/devices).
Can you please use Report menu -> Send test report to developer option? Then I can check the actual situation and advise, verify if there may be something cause troubles.
Generally it should be supported without problems in recent versions of Hard Disk Sentinel, the health, temperature and complete status should be detected and displayed of course.
If you use older version, I suggest to update to latest 5.70 (or even try the latest possible 5.70.9 beta version just to be sure:
https://www.hdsentinel.com/beta5/hdsent ... 9-amnr.zip
as it has generic updates for many SSDs/devices).
Can you please use Report menu -> Send test report to developer option? Then I can check the actual situation and advise, verify if there may be something cause troubles.
Re: Samsung T7 SSD 1Tb
Thanks for the prompt response.
I am already using version 5.70. I looked under Updates for the 5.709 version but couldn't see it anywhere.
Screen capture of app attached. As you can see, the two Samsung drives at the bottom of the left panel show neither Health nor temperature.
I am already using version 5.70. I looked under Updates for the 5.709 version but couldn't see it anywhere.
Screen capture of app attached. As you can see, the two Samsung drives at the bottom of the left panel show neither Health nor temperature.
- Attachments
-
- Scan of Hard Disk Sentinel screen and overlay of Help>About screen.
- HD Scan.jpg (518.15 KiB) Viewed 5816 times
Re: Samsung T7 SSD 1Tb
Sorry - I reacted to the auto post re a reply being posted before I read the following email!
I have now installed and that does work.
Incidentally, I saw the notice re it being unsupported on the list here -
https://www.hdsentinel.com/compatibility_ssd.php
I have now installed and that does work.
Incidentally, I saw the notice re it being unsupported on the list here -
https://www.hdsentinel.com/compatibility_ssd.php
- hdsentinel
- Site Admin
- Posts: 3128
- Joined: 2008.07.27. 17:00
- Location: Hungary
- Contact:
Re: Samsung T7 SSD 1Tb
The https://www.hdsentinel.com/compatibility_ssd.php page originally designed to show some of the most common SSDs tested and verified.
Currently Hard Disk Sentinel supports over 6000 different SSD models and as lots released every week and constantly added to the software, most of them may not appear on this list, but it does not really mean it's not supported.
If the status seem missing for a new model, I always recommend to check with latest possible beta version and also use Report menu -> Send test report to developer option.
Such developer reports always help to check the actual situation, verify and confirm:
- if the status is still missing / partial, it can help to improve
- if the status is properly displayed, it would confirm things and allow to check if there is any specific change/optimization is still possible.
So if possible, please use Report menu -> Send test report to developer option now
Thanks for your attention and support!
Currently Hard Disk Sentinel supports over 6000 different SSD models and as lots released every week and constantly added to the software, most of them may not appear on this list, but it does not really mean it's not supported.
If the status seem missing for a new model, I always recommend to check with latest possible beta version and also use Report menu -> Send test report to developer option.
Such developer reports always help to check the actual situation, verify and confirm:
- if the status is still missing / partial, it can help to improve
- if the status is properly displayed, it would confirm things and allow to check if there is any specific change/optimization is still possible.
So if possible, please use Report menu -> Send test report to developer option now
Thanks for your attention and support!