Failure Predicted - Attribute: 1 Raw Read Error Rate
Posted: 2019.09.14. 16:57
I download and install today Hard Disk Sentinal 4.20 and it gives me following error.
"Failure Predicted - Attribute: 1 Raw Read Error Rate, Errors occurred while reading raw data from a disk. Indicate problem with the disk surface or the read/write heads.
There are 19 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
Replace hard disk immediately.
It is recommended to backup immediately to prevent data loss."
After that I run Check Disk on win 10 PowerShell and it gives me following data.
"PS C:\WINDOWS\system32> chkdsk e:
The type of the file system is NTFS.
Volume label is New Volume.
WARNING! /F parameter not specified.
Running CHKDSK in read-only mode.
Stage 1: Examining basic file system structure ...
256 file records processed.
File verification completed.
0 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
1 reparse records processed.
282 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered to lost and found.
1 reparse records processed.
Stage 3: Examining security descriptors ...
Security descriptor verification completed.
14 data files processed.
CHKDSK is verifying Usn Journal...
1520 USN bytes processed.
Usn Journal verification completed.
Windows has scanned the file system and found no problems.
No further action is required.
312568831 KB total disk space.
15623036 KB in 9 files.
76 KB in 15 indexes.
0 KB in bad sectors.
76259 KB in use by the system.
65536 KB occupied by the log file.
296869460 KB available on disk.
4096 bytes in each allocation unit.
78142207 total allocation units on disk.
74217365 allocation units available on disk."
Please tell me what,s wrong with my harddisk and this is my secondary Hard Disk. Primary Hard Disk is SSD and that work perfectly for me but when I copy to secondary harddisk something or want to install something in that.It gives me very poor speed like 1 Mb or below this.
"Failure Predicted - Attribute: 1 Raw Read Error Rate, Errors occurred while reading raw data from a disk. Indicate problem with the disk surface or the read/write heads.
There are 19 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
Replace hard disk immediately.
It is recommended to backup immediately to prevent data loss."
After that I run Check Disk on win 10 PowerShell and it gives me following data.
"PS C:\WINDOWS\system32> chkdsk e:
The type of the file system is NTFS.
Volume label is New Volume.
WARNING! /F parameter not specified.
Running CHKDSK in read-only mode.
Stage 1: Examining basic file system structure ...
256 file records processed.
File verification completed.
0 large file records processed.
0 bad file records processed.
Stage 2: Examining file name linkage ...
1 reparse records processed.
282 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered to lost and found.
1 reparse records processed.
Stage 3: Examining security descriptors ...
Security descriptor verification completed.
14 data files processed.
CHKDSK is verifying Usn Journal...
1520 USN bytes processed.
Usn Journal verification completed.
Windows has scanned the file system and found no problems.
No further action is required.
312568831 KB total disk space.
15623036 KB in 9 files.
76 KB in 15 indexes.
0 KB in bad sectors.
76259 KB in use by the system.
65536 KB occupied by the log file.
296869460 KB available on disk.
4096 bytes in each allocation unit.
78142207 total allocation units on disk.
74217365 allocation units available on disk."
Please tell me what,s wrong with my harddisk and this is my secondary Hard Disk. Primary Hard Disk is SSD and that work perfectly for me but when I copy to secondary harddisk something or want to install something in that.It gives me very poor speed like 1 Mb or below this.