Hello
I have a Truenas Scale server with 157 disks, when I run HDSentinel for linux it only shows me information of the first 130 disks (sda.. sddz).
The version is Hard Disk Sentinel for LINUX console 0.20c-x64.10851
Thank you
HDSentinel shows only the first 130 discs
-
hdsentinel
- Site Admin
- Posts: 3170
- Joined: 2008.07.27. 17:00
- Location: Hungary
- Contact:
Re: HDSentinel shows only the first 130 discs
Hello,
Thanks for your attention. Good to hear that 130 disks detected and reported.
Yes, it is possible but no problems as you can any time specify additional devices to detect by the -devs command line switch:
-devs d1,d2 - detect (comma separated) devices in addition to default ones eg. /dev/sda,/dev/sdb,/dev/sdc
(see: https://www.hdsentinel.com/hard_disk_sentinel_linux.php )
Probably this auto-detection limit may increase even further in a future version.
Thanks for your attention. Good to hear that 130 disks detected and reported.
Yes, it is possible but no problems as you can any time specify additional devices to detect by the -devs command line switch:
-devs d1,d2 - detect (comma separated) devices in addition to default ones eg. /dev/sda,/dev/sdb,/dev/sdc
(see: https://www.hdsentinel.com/hard_disk_sentinel_linux.php )
Probably this auto-detection limit may increase even further in a future version.