SSD health is lower (5%) but work very well

How, what, where and why - when using the software.
innocent546
Posts: 2
Joined: 2023.05.16. 20:07

SSD health is lower (5%) but work very well

Post by innocent546 »

-- Background --

My SSD suddenly stopped working yesterday while I was using it. This is probably due to a SATA cable error or a circuit short. After a few moments, my PC restarted automatically (just as with a blue screen error). However, the BIOS stopped detecting the SSD afterward.

Then I cleaned the PC, cleared any dust that might cause a short circuit, and plugged in the SSD again. The BIOS started to detect the drive, and the PC started booting up. However, some system files were corrupted and windows ended up with a black screen after the logo screen. Then I formatted the drive, reinstalled Windows and booted the PC again. After OS reinstallation, it started working perfectly well.

-- Problem --

.
Annotation 2023-05-16 234404.png
Annotation 2023-05-16 234404.png (48.84 KiB) Viewed 1553 times
.

After OS reinstallation, I installed hard disk sentinel and checked the SSD status. The health is now at 5%, and it used to be 100% before this incident. However, I can't notice any sign of a performance drop or any sign of further data corruption. The SSD works perfectly well, just as it used to.

I used multiple programs to test whether there are bad sectors. There are no bad sectors in its current condition.

Could it be that the bad sectors in SSDs aren't as alarming as the bad sectors in HDDs? In my experience, an HDD with this many bad sectors would likely be in very bad condition, causing consistent disk errors and data corruption with noticably poor performance. This doesn't seem to be the case with this SSD.

There is a warranty remaining for this SSD. Should i claim warranty over this, or would it be fine to keep using this SSD under these conditions? Claiming the warranty would also involve reinstalling the OS again and configuing other software from scratch, on top of other hassles. I would like to avoid that process if it isn't necessary.

Here is the complete report for this SSD

Code: Select all


  -- Physical Disk Information - Disk: #0: OCPC SSD XTREME 256GB --

    Hard Disk Summary
   -------------------
    Hard Disk Number . . . . . . . . . . . . . . . . : 0
    Interface  . . . . . . . . . . . . . . . . . . . : S-ATA Gen3, 6 Gbps
    Disk Controller  . . . . . . . . . . . . . . . . : Standard SATA AHCI Controller (AHCI) [VEN: 8086, DEV: 8C02] Version: 10.0.19041.1889, 6-21-2006
    Disk Location  . . . . . . . . . . . . . . . . . : Bus Number 0, Target Id 0, LUN 0
    Hard Disk Model ID . . . . . . . . . . . . . . . : OCPC SSD XTREME 256GB
    Firmware Revision  . . . . . . . . . . . . . . . : VA011CC0
    Hard Disk Serial Number  . . . . . . . . . . . . : 2504221200127
    Total Size . . . . . . . . . . . . . . . . . . . : 244191 MB
    Power State  . . . . . . . . . . . . . . . . . . : Active
    Device Type  . . . . . . . . . . . . . . . . . . : Removable, safely remove required
    Logical Drive(s) . . . . . . . . . . . . . . . . : C: [] 
    Current Temperature  . . . . . . . . . . . . . . : 40 °C
    Power On Time  . . . . . . . . . . . . . . . . . : 46 days, 16 hours
    Estimated Remaining Lifetime . . . . . . . . . . : 5 days
    Lifetime Writes  . . . . . . . . . . . . . . . . : 90.06 GB
    Health . . . . . . . . . . . . . . . . . . . . . : #------------------- 5 % (Critical)
    Performance  . . . . . . . . . . . . . . . . . . : #################### 100 % (Excellent)

    There are 1144 bad sectors on the disk surface. The contents of these sectors were moved to the spare area.
    Based on the number of remapping operations, the bad sectors may form continuous areas.
    143 errors reported during write to the device.
    Problems occurred between the communication of the disk and the host 143 times.
    In case of sudden system crash, reboot, blue-screen-of-death, inaccessible file(s)/folder(s), it is recommended to verify data and power cables, connections - and if possible try different cables to prevent further problems.
    More information: https://www.hdsentinel.com/hard_disk_case_communication_error.php
    It is recommended to examine the log of the disk regularly. All new problems found will be logged there.
    The TRIM feature of the SSD is supported and enabled for optimal performance.
      It is recommended to backup immediately to prevent data loss.

    ATA Information
   -----------------
    Hard Disk Cylinders  . . . . . . . . . . . . . . : 496149
    Hard Disk Heads  . . . . . . . . . . . . . . . . : 16
    Hard Disk Sectors  . . . . . . . . . . . . . . . : 63
    ATA Revision . . . . . . . . . . . . . . . . . . : ACS-3, ATA8-ACS version 6
    Transport Version  . . . . . . . . . . . . . . . : SATA Rev 3.0
    Total Sectors  . . . . . . . . . . . . . . . . . : 500118192
    Bytes Per Sector . . . . . . . . . . . . . . . . : 512
    Multiple Sectors . . . . . . . . . . . . . . . . : 16
    Error Correction Bytes . . . . . . . . . . . . . : 0
    Unformatted Capacity . . . . . . . . . . . . . . : 244198 MB
    Maximum PIO Mode . . . . . . . . . . . . . . . . : 4
    Maximum Multiword DMA Mode . . . . . . . . . . . : 2
    Highest Possible Transfer Rate . . . . . . . . . : S-ATA Gen3 Signaling Speed (6 Gps)
    Negotiated Transfer Rate . . . . . . . . . . . . : S-ATA Gen3 Signaling Speed (6 Gps)
    Minimum Multiword DMA Transfer Time  . . . . . . : 120 ns
    Recommended Multiword DMA Transfer Time  . . . . : 120 ns
    Minimum PIO Transfer Time Without IORDY  . . . . : 120 ns
    Minimum PIO Transfer Time With IORDY . . . . . . : 120 ns
    ATA Control Byte . . . . . . . . . . . . . . . . : Valid
    ATA Checksum Value . . . . . . . . . . . . . . . : Valid

    Acoustic Management Configuration
   -----------------------------------
    Acoustic Management  . . . . . . . . . . . . . . : Not supported
    Acoustic Management  . . . . . . . . . . . . . . : Disabled
    Current Acoustic Level . . . . . . . . . . . . . : Default (00h)
    Recommended Acoustic Level . . . . . . . . . . . : Default (00h)

    ATA Features
   --------------
    Read Ahead Buffer  . . . . . . . . . . . . . . . : Supported, Disabled
    DMA  . . . . . . . . . . . . . . . . . . . . . . : Supported
    Ultra DMA  . . . . . . . . . . . . . . . . . . . : Supported
    S.M.A.R.T. . . . . . . . . . . . . . . . . . . . : Supported
    Power Management . . . . . . . . . . . . . . . . : Supported
    Write Cache  . . . . . . . . . . . . . . . . . . : Supported
    Host Protected Area  . . . . . . . . . . . . . . : Supported
    HPA Security Extensions  . . . . . . . . . . . . : Not supported
    Advanced Power Management  . . . . . . . . . . . : Not supported
    Extended Power Management  . . . . . . . . . . . : Not supported
    Power Up In Standby  . . . . . . . . . . . . . . : Not supported
    48-Bit LBA Addressing  . . . . . . . . . . . . . : Supported
    Device Configuration Overlay . . . . . . . . . . : Not supported
    IORDY Support  . . . . . . . . . . . . . . . . . : Supported
    Read/Write DMA Queue . . . . . . . . . . . . . . : Not supported
    NOP Command  . . . . . . . . . . . . . . . . . . : Supported
    Trusted Computing  . . . . . . . . . . . . . . . : Not supported
    64-Bit World Wide ID . . . . . . . . . . . . . . : 0000000000000000
    Streaming  . . . . . . . . . . . . . . . . . . . : Not supported
    Media Card Pass Through  . . . . . . . . . . . . : Not supported
    General Purpose Logging  . . . . . . . . . . . . : Supported
    Error Logging  . . . . . . . . . . . . . . . . . : Supported
    CFA Feature Set  . . . . . . . . . . . . . . . . : Not supported
    CFast Device . . . . . . . . . . . . . . . . . . : Not supported
    Long Physical Sectors (1)  . . . . . . . . . . . : Not supported
    Long Logical Sectors . . . . . . . . . . . . . . : Not supported
    Write-Read-Verify  . . . . . . . . . . . . . . . : Not supported
    NV Cache Feature . . . . . . . . . . . . . . . . : Not supported
    NV Cache Power Mode  . . . . . . . . . . . . . . : Not supported
    NV Cache Size  . . . . . . . . . . . . . . . . . : Not supported
    Free-fall Control  . . . . . . . . . . . . . . . : Not supported
    Free-fall Control Sensitivity  . . . . . . . . . : Not supported
    Service Interrupt  . . . . . . . . . . . . . . . : Not supported
    IDLE IMMEDIATE Command With UNLOAD Feature . . . : Not supported
    Zoned Capabilities . . . . . . . . . . . . . . . : Not supported
    SCT Command Transport  . . . . . . . . . . . . . : Not supported
    SCT Error Recovery Control . . . . . . . . . . . : Not supported
    Nominal Media Rotation Rate  . . . . . . . . . . : Non-rotating Media (SSD)
    Nominal Form Factor  . . . . . . . . . . . . . . : 2.5 inch

    SSD Features
   --------------
    Data Set Management  . . . . . . . . . . . . . . : Supported
    TRIM Command . . . . . . . . . . . . . . . . . . : Supported
    Deterministic Read After TRIM  . . . . . . . . . : Supported
    Read Zeroes After TRIM . . . . . . . . . . . . . : Not supported
    Operating System TRIM Function . . . . . . . . . : Supported, Enabled

    S.M.A.R.T. Details
   --------------------
    Off-line Data Collection Status  . . . . . . . . : Never Started
    Self Test Execution Status . . . . . . . . . . . : Successfully Completed
    Total Time To Complete Off-line Data Collection  : 1 seconds
    Execute Off-line Immediate . . . . . . . . . . . : Supported
    Abort/restart Off-line By Host . . . . . . . . . : Not supported
    Off-line Read Scanning . . . . . . . . . . . . . : Supported
    Short Self-test  . . . . . . . . . . . . . . . . : Supported
    Extended Self-test . . . . . . . . . . . . . . . : Supported
    Conveyance Self-test . . . . . . . . . . . . . . : Not supported
    Selective Self-Test  . . . . . . . . . . . . . . : Supported
    Save Data Before/After Power Saving Mode . . . . : Not supported
    Enable/Disable Attribute Autosave  . . . . . . . : Supported
    Error Logging Capability . . . . . . . . . . . . : Supported
    Short Self-test Estimated Time . . . . . . . . . : 1 minutes
    Extended Self-test Estimated Time  . . . . . . . : 2 minutes
    Last Short Self-test Result  . . . . . . . . . . : Never Started
    Last Short Self-test Date  . . . . . . . . . . . : Never Started
    Last Extended Self-test Result . . . . . . . . . : Never Started
    Last Extended Self-test Date . . . . . . . . . . : Never Started

    Security Mode
   ---------------
    Security Mode  . . . . . . . . . . . . . . . . . : Supported
    Security Erase . . . . . . . . . . . . . . . . . : Supported
    Security Erase Time  . . . . . . . . . . . . . . : 2 minutes
    Security Enhanced Erase Feature  . . . . . . . . : Supported
    Security Enhanced Erase Time . . . . . . . . . . : 20 minutes
    Security Enabled . . . . . . . . . . . . . . . . : No
    Security Locked  . . . . . . . . . . . . . . . . : No
    Security Frozen  . . . . . . . . . . . . . . . . : Yes
    Security Counter Expired . . . . . . . . . . . . : No
    Security Level . . . . . . . . . . . . . . . . . : High
    Device Encrypts All User Data  . . . . . . . . . : No
    Sanitize . . . . . . . . . . . . . . . . . . . . : Not supported
    Overwrite  . . . . . . . . . . . . . . . . . . . : Not supported
    Crypto Scramble  . . . . . . . . . . . . . . . . : Not supported
    Block Erase  . . . . . . . . . . . . . . . . . . : Not supported
    Sanitize Antifreeze Lock . . . . . . . . . . . . : Not supported
    ACS-3 Commands Allowed By Sanitize . . . . . . . : No

    Serial ATA Features
   ---------------------
    S-ATA Compliance . . . . . . . . . . . . . . . . : Yes
    S-ATA I Signaling Speed (1.5 Gps)  . . . . . . . : Supported
    S-ATA II Signaling Speed (3 Gps) . . . . . . . . : Supported
    S-ATA Gen3 Signaling Speed (6 Gps) . . . . . . . : Supported
    Receipt Of Power Management Requests From Host . : Not supported
    PHY Event Counters . . . . . . . . . . . . . . . : Supported
    Non-Zero Buffer Offsets In DMA Setup FIS . . . . : Not supported
    DMA Setup Auto-Activate Optimization . . . . . . : Supported, Disabled
    Device Initiating Interface Power Management . . : Not supported
    In-Order Data Delivery . . . . . . . . . . . . . : Not supported
    Asynchronous Notification  . . . . . . . . . . . : Not supported
    Software Settings Preservation . . . . . . . . . : Supported, Enabled
    Native Command Queuing (NCQ) . . . . . . . . . . : Supported
    Queue Length . . . . . . . . . . . . . . . . . . : 32
    NCQ Streaming  . . . . . . . . . . . . . . . . . : Not supported
    NCQ Autosense  . . . . . . . . . . . . . . . . . : Not supported
    Automatic Partial To Slumber Translations  . . . : Not supported
    Rebuild Assist . . . . . . . . . . . . . . . . . : Not supported
    Hybrid Information . . . . . . . . . . . . . . . : Not supported
    Device Sleep (DevSleep)  . . . . . . . . . . . . : Not supported
    DevSleep To ReducedPwrState  . . . . . . . . . . : Not supported

    S.M.A.R.T.
   ------------
No.  Attribute                Thre.. Value  Worst  Data                Status                   Flags                                                  
1    Raw Data Error Rate      50     100    100    000000000000        OK                       Self Preserving, Error-Rate, Performance, Statistica.. 
5    Reallocated Sectors Co.. 10     100    100    000000000478        OK                       Self Preserving, Event Count, Statistical, Critical    
9    Power On Time Count      0      100    100    000000000460        OK (Always passing)      Self Preserving, Event Count, Statistical              
12   Drive Power Cycle Count  0      100    100    0000000000DE        OK (Always passing)      Self Preserving, Event Count, Statistical              
161  Valid Spare Blocks       50     100    100    000000000019        OK                       Self Preserving, Event Count, Statistical              
162  Total Erase Count        0      100    100    00000000C593        OK (Always passing)      Self Preserving, Event Count, Statistical              
163  Initial Invalid Blocks   0      100    100    000000000BB8        OK (Always passing)      Self Preserving, Event Count, Statistical              
164  Total TLC Erase Count    0      100    100    00000000000F        OK (Always passing)      Self Preserving, Event Count, Statistical              
166  Minimum TLC Erase Count  0      100    100    000000000026        OK (Always passing)      Self Preserving, Event Count, Statistical              
167  Average TLC Erase Count  0      100    100    000000000000        OK (Always passing)      Self Preserving, Event Count, Statistical              
168  Vendor Specific          0      100    100    000000000000        OK (Always passing)      Self Preserving, Event Count, Statistical              
169  Percentage Lifetime Re.. 0      100    100    000000000062        OK (Always passing)      Self Preserving, Event Count, Statistical              
171  Program Fail Count       0      100    100    000000000000        OK (Always passing)      Self Preserving, Event Count, Statistical              
172  Erase Fail Count         0      100    100    000000000000        OK (Always passing)      Self Preserving, Event Count, Statistical              
174  Unexpected Power Loss .. 0      100    100    000000000007        OK (Always passing)      Self Preserving, Event Count, Statistical              
175  ECC Fail Count           0      100    100    00000000008F        OK (Always passing)      Self Preserving, Event Count, Statistical              
181  Program Fail Count       0      100    100    0000033075D5        OK (Always passing)      Self Preserving, Statistical                           
187  Reported Uncorrectable.. 0      100    100    00000000008F        OK (Always passing)      Self Preserving, Event Count, Statistical              
194  Temperature              0      100    100    000000000028        OK (Always passing)      Self Preserving, Statistical                           
195  Cumulative Corrected ECC 0      100    100    000000000000        OK (Always passing)      Self Preserving, Event Count, Error-Rate, Statistical  
196  Reallocation Event Count 0      100    100    00000000008F        OK (Always passing)      Self Preserving, Event Count, Statistical              
199  Ultra DMA CRC Error Co.. 0      100    100    00000000008F        OK (Always passing)      Self Preserving, Event Count, Statistical              
206  Min. Erase Count         0      100    100    000000000001        OK (Always passing)      Self Preserving, Event Count, Statistical              
207  Max. Erase Count         0      100    100    00000000001F        OK (Always passing)      Self Preserving, Event Count, Statistical              
232  Available Reserved Space 0      100    100    000000000061        OK (Always passing)      Self Preserving, Event Count, Statistical              
233  Media Wearout Indicator  0      100    100    000000000211        OK (Always passing)      Self Preserving, Event Count, Statistical              
241  Total Host Writes        0      100    100    000000000B42        OK (Always passing)      Self Preserving, Event Count, Statistical              
242  Total Host Reads         0      100    100    000000001491        OK (Always passing)      Self Preserving, Event Count, Statistical              
249  Total GB Written to NA.. 0      100    100    0000000002E5        OK (Always passing)      Self Preserving, Event Count, Statistical              
250  Total GB Written to NA.. 0      100    100    000000000DE2        OK (Always passing)      Self Preserving, Event Count, Statistical              

    Transfer Rate Information
   ---------------------------
    Total Data Read  . . . . . . . . . . . . . . . . : 2,304 MB,  251,293 MB since installation  (5/16/2023)
    Total Data Write . . . . . . . . . . . . . . . . : 357 MB,  7,263 MB since installation
    Average Reads Per Day  . . . . . . . . . . . . . : 251,293.00 MB
    Average Writes Per Day . . . . . . . . . . . . . : 7,263.00 MB
    Current Transfer Rate  . . . . . . . . . . . . . : 1033 KB/s
    Maximum Transfer Rate  . . . . . . . . . . . . . : 230056 KB/s
    Current Read Rate  . . . . . . . . . . . . . . . : 941 KB/s
    Current Write Rate . . . . . . . . . . . . . . . : 92 KB/s
    Current Disk Activity  . . . . . . . . . . . . . : 1 %

innocent546
Posts: 2
Joined: 2023.05.16. 20:07

Re: SSD health is lower (5%) but work very well

Post by innocent546 »

There was no noticable performance drop in practical day to day usage. However, i ran a disk benchmark and figured out that the sequential write speed has dropped from 453MB/s to 197MB/s. I think it would be better to claim warranty over this with the speed drop. Read speed has dropped as well but by a relatively small margin (551MB/s to 452MB/s).
User avatar
hdsentinel
Site Admin
Posts: 3128
Joined: 2008.07.27. 17:00
Location: Hungary
Contact:

Re: SSD health is lower (5%) but work very well

Post by hdsentinel »

Yes, I'm afraid I can confirm SSDs can have bad sectors as well, exactly as hard disks: when a problem found, the SSD automatically writes the data again to a spare sector and re-directs all further reads and writes to that sector.

This is exactly what hard disks do - just on SSDs the whole process is much quicker and there are no noticeable signs, for example no "clicking" or other weird noises, no retries / substantial delays and so.

Manufacturers prepared for this and (even if it is bad for us) they allow bad sectors. For more information, please check:
https://www.hdsentinel.com/ssd_case_bad_sectors.php

Ideally yes, we should never notice problems: the original bad sectors no longer used (instead the spare sectors read/written), so until that spare area is full, the drive should operate correctly.
In best case, the performance can drop (as you can see) but in worst case as new and new bad sectors appear, data corruption / data loss may occur.

In real life usually SSDs with so low Health % produce lots of problems: freezes, unreadable files/folders, damaged/corrupted data, unbootable system and so as more and more sectors fail. If you did not encounter any of these ("just" the slowness) you're really lucky.

Yes, I'd definitely ask for warranty replacement (after a backup and a complete erase eg. by Disk menu -> Surface test -> Write test or Reinitialise Disk Surface when the SSD connected as secondary drive via USB dock/enclosure).

Maybe if possible, I'd ask to please use Report menu -> Send test report to developer option. Checking the status of such problematic / failing SSDs (or hard disks) always help further development, how to detect/report errors/issues specifically for a model.
Post Reply