Incomplete Reports on HD interprise HP Proliant

[Nilson]

Good afternoon, my reports of the HDs of My HP Proliant server with HP server HDs
temperature, useful life, time of use, how long is its useful life.
I am using HDsentinel application (Linux Console)
Ubuntu 18.4 and 20.4

Examining hard disk configuration ...

HDD Device 0: /dev/sda
HDD Model ID : HP LOGICAL VOLUME
HDD Serial No: ?
HDD Revision : 6.60
HDD Size : 476908 MB
Interface : SCSI
Temperature : Unknown °C
Highest Temp.: Unknown °C
Health : Unknown %
Performance : Unknown %
Power on time:
Est. lifetime:

HDD Device 1: /dev/sdb
HDD Model ID : HP LOGICAL VOLUME
HDD Serial No: ?
HDD Revision : 6.60
HDD Size : 476908 MB
Interface : SCSI
Temperature : Unknown °C
Highest Temp.: Unknown °C
Health : Unknown %
Performance : Unknown %
Power on time:
Est. lifetime:

Report file saved as: /geral/HDSentinelReport.html

[Nilson]

Good afternoon, my reports of the HDs of my HP Proliant server where my Dell Seagate hd ..
Reports come out complete

HDD Device 2: /dev/sda
HDD Model ID : SEAGATE ST2000NM013A
HDD Serial No: WS10LWDQ
HDD Revision : CSJA
HDD Size : 1907199 MB
Interface : LSI RAID #0/2 [8-0] SAS
Temperature : 26 °C
Highest Temp.: 26 °C
Health : 100 %
Performance : 100 %
Power on time: 27 days, 11 hours (estimated)
Est. lifetime: more than 1000 days
Total written: 17.77 GB
The status of the hard disk is perfect.
No actions needed.

HDD Device 3: /dev/sda
HDD Model ID : SSDSC2KB960GZR
HDD Serial No: PHYI143103M1960CGN
HDD Revision : 7CV1DL70
HDD Size : 915715 MB
Interface : LSI RAID #0/3 [8-0]
Temperature : 27 °C
Highest Temp.: 27 °C
Health : 100 %
Performance : 100 %
Power on time: 27 days, 11 hours
Est. lifetime: more than 1000 days
Total written: 404.75 GB
The status of the solid state disk is PERFECT. Problematic or weak sectors were not found.
The health is determined by SSD specific S.M.A.R.T. attribute(s): #233 Media Wearout Indicator
No actions needed.

[hdsentinel]

Thanks for your message and attention.

Yes, I can confirm that under Linux the RAID controller support is limited. As you can see, with the HP RAID controller it is not possible to access/detect details, just with the other controller. This is independent from the disk drive model, but only related to the controller.

The Windows version has support for HP RAID controllers too, but I'm afraid it is not available in the Linux version.

[joliebrousseau]

It is not possible to access or detect details with the HP RAID controller. However, it is possible with the other controller. This limitation is independent of the disk drive model and only related to the controller.

[joliebrousseau]

it seems like you are checking the status of your HP Proliant server with HP server HDs using the HDD Sentinel application on Ubuntu 18.4 and 20.4. It's always a good idea to keep an eye on the temperature and useful life of your hard disks to ensure that they are working optimally.

However, it looks like the application is unable to provide you with certain details like the temperature, health, performance, power on time, and estimated lifetime of the hard disks. Perhaps you could try running some other diagnostic tools to get a more comprehensive understanding of the state of your disks.

Overall, it's important to regularly monitor the health and performance of your hard disks to avoid any data loss or system crashes.

[klbblk72]

Please kindly provide the detail & description of your HP RAID controller type, then to confirm whether it would be within the hdsentinel compatibility disk controller.