Rescan disks
Rescan disks
How Do I re-scan my drives? I had a drive go bad in my Windows Home Server, which I have replaced, and now the new drive isn't showing up.
-
hdsentinel
- Site Admin
- Posts: 3128
- Joined: 2008.07.27. 17:00
- Location: Hungary
- Contact:
Re: Rescan disks
In most cases, Hard Disk Sentinel automatically re-scans and displays the changed configuration.
A manual re-scan is possible with the leftmost icon (the two arrows forming a circle) in the toolbar, the upper left area of Hard Disk Sentinel window. If the drive is still missing, it may be caused that Windows Home Server does not recognise it (you can verify in "Disk Management" window of Windows). Please use Report menu Send test report to developer option in that case so I can check and may advise.
A manual re-scan is possible with the leftmost icon (the two arrows forming a circle) in the toolbar, the upper left area of Hard Disk Sentinel window. If the drive is still missing, it may be caused that Windows Home Server does not recognise it (you can verify in "Disk Management" window of Windows). Please use Report menu Send test report to developer option in that case so I can check and may advise.
Re: Rescan disks
Sorry for the delay in response. I had another drive coming in that I wanted/needed to get into the server and I wanted to make sure that it showed up correctly. As of this point, all 11 drives are showing up correctly and this has now been resolved. Thanx!