email alert not sending

[HARD_DRIVEN]

I cannot get

hds.jpg (104.89 KiB) Viewed 5656 times

email alert to send through hotmail. Hotmail is now outlook so using outlook serversas attached

[hdsentinel]

I can confirm that there should be no problems, outlook / hotmail accounts are working without issues
(if not blocked by firewall).

Please verify the email configuration, maybe the username / password is not correct - or maybe the firewall blocks the connection.

Please check:

viewtopic.php?f=6&t=10801&p=14849&hilit=hotmail#p14849

Also it is possible that the smtp sending is blocked - the above link also describes a such situation:

Turns out that Outlook.com was blocking SMTP send on my account, for no apparent reason.
I cleared it up with Microsoft and sending is working now. Sorry for the false alarm, and thank you for your proactive help.

[HARD_DRIVEN]

Thanks. How can one test the display message on screen option

[hdsentinel]

Just configure an alert which should be displayed:

1) On Configuration -> Message settings page, enable the "Display message on screen" option (and may disable the Send e-mail option if you want message to be displayed on the screen only).

2) Then on the Alerts page, enable one or more event(s) below the "Send/display message" column.

When that event happens (on the next periodic detection) - the appropriate alert is displayed.


For example, try to configure a yellow-temperature-limit alert: on Configuration -> Alerts page, under "When temperature is too high" enable the first alert (temperature value showed with yellow color) below the "Send/display message" column.

This way when the temperature of any hard disk is between the yellow and red thresholds, the alert displayed.
You may adjust the temperature thresholds at Configuration -> Thresholds / Tray icon.

For more information, please check the Help about alerts: http://www.hdsentinel.com/help/en/25_c_alert.html

[HARD_DRIVEN]

Just configure an alert which should be displayed:

1) On Configuration -> Message settings page, enable the "Display message on screen" option (and may disable the Send e-mail option if you want message to be displayed on the screen only).

2) Then on the Alerts page, enable one or more event(s) below the "Send/display message" column.

When that event happens (on the next periodic detection) - the appropriate alert is displayed.


For example, try to configure a yellow-temperature-limit alert: on Configuration -> Alerts page, under "When temperature is too high" enable the first alert (temperature value showed with yellow color) below the "Send/display message" column.

This way when the temperature of any hard disk is between the yellow and red thresholds, the alert displayed.
You may adjust the temperature thresholds at Configuration -> Thresholds / Tray icon.

For more information, please check the Help about alerts: http://www.hdsentinel.com/help/en/25_c_alert.html

Thanks got it working. i had to change the temp to below the normal- make the normal 'too high' -to get a test of the desktop alert

[hdsentinel]

Thanks, yes, sometimes adjusting the thresholds may help to trigger a test-alert