Mount points confused for hdsentinel, but correct otherwise.
Refresh does not work.
I have several raid 1 volumes in my Win 8.1 machine. The windows drive control panel lists mount points correctly and everything works fine. Now HD Sentinel appears confused. It shows me partition names and mounted partitions flipped between two drive arrays, i.e., mount points and partitions of array A under array B and vice versa.
Is that a known bug? There is no obvious way to correct this. Any ideas how to fix it? Thanks.
Mount points confused
-
hdsentinel
- Site Admin
- Posts: 3128
- Joined: 2008.07.27. 17:00
- Location: Hungary
- Contact:
Re: Mount points confused
In some situations (when RAID configuration used) the controller may not provide the logical drives in correct orders.
Hard Disk Sentinel has numerous different solutions to correct the probably incorrect logical drive information but depending on the actual controller and RAID configuration, there may be difference.
Please use Report menu -> Send test report to developer option (and in the comment field specify what would be the correct order), as then it is possible to examine the actual situation, verify the "raw" response of the controller and check the possibilities about how to improve the situation.
Hard Disk Sentinel has numerous different solutions to correct the probably incorrect logical drive information but depending on the actual controller and RAID configuration, there may be difference.
Please use Report menu -> Send test report to developer option (and in the comment field specify what would be the correct order), as then it is possible to examine the actual situation, verify the "raw" response of the controller and check the possibilities about how to improve the situation.